Kedacom IPC2860 Series User Manual Download Page 66

Page: 66 / 68

2) Select Start Time and End Time, and click "

Search

". The search result will show on the list

below;

3) Click "

Save Logs

" to download all logs; click "

Delete logs

" to clear all logs.

Note: The system can save maximum 2,000 entries of logs.

8.6 System Maintenance

Picture 8-8 System maintenance

On the interface of "System Maintenance", you can reboot and upgrade cameras or perform other

maintenance over the device.



Reboot: Click "

Reboot

" to reboot the camera.



Auto Maintenance: Check "

Enable

" to enable auto maintenance, and configure

Maintenance Cycle and Maintenance Time. Click "

Save

" to validate setting.



Upgrade: Upgrade system version. Click

“

Upgrade

” and open local upgrade file in <*.pkg>

format. During upgrading, please do nothing but waiting. After upgrading, re-login to the

web client. If it is necessary to upgrade the web client, the system will prompt to

download the plug-in.



Configuration Management: including partial restoration, complete restoration,

configuration export and import parameter.



Partial Restoration: Click this button and all parameters will restore to factory default

except camera network setting, access protocols, user info and RTSP authorization.



Complete Restoration: Click this button and all parameters will restore to factory

default.



Configuration Export: After configuring camera mode, you can export the configuration

to local PC. Click "

Export

" to select a local save path.

Summary of Contents for IPC2860 Series





































































Search results

Summary of Contents for IPC2860 Series

Reviews:

Related manuals for IPC2860 Series

Brands by name

Popular brands

Kedacom IPC2860 Series, User Manual

Search results

Summary of Contents for IPC2860 Series

Reviews:

Related manuals for IPC2860 Series

Brands by name

Popular brands