36
Picture 6-3 VSIP
1) Select a method from the dropdown list of VMS Method, "IP Address" or "Domain". If
selecting "IP Address", input VMS address in "VMS Address (IPv4)"; if selecting
"Domain", input VMS domain name in "Registered VMS Domain";
2) Input "VMS Port Number", 5510 by default;
3) Input "Camera UUID" and "Camera Password". Camera UUID is distributed by VMS and
the password needs no verification so you don't have to input;
4) When the camera is in NAT, check "Send NAT Probe Packets"; you can check "Auto
Networking" to enable function of auto networking;
5) After finish, click "
Save
" to validate setting.
Note: VSIP protocol only supports registering to VMS of this company or other
SDK-integrated back-end platforms.
6.2.2
ONVIF
Picture 6-4 ONVIF
