•
Insert batteries into the Remote Control unit by following the "REMOTE CONTROL USE"
section in this manual.
•
Connect the DC Cord to 12-Volt Power by following the "POWER CONNECTION"
section in this manual.
(1) Press POWER button on the TV or on the remote control.
(2) Press TV/VIDEO button
On the TV or on the remote control to select the
desired mode.(TV, VIDEO 1, VIDEO 2, VIDEO 3).
(3) Select desired channel
Using the CHANNEL
▼
/
▲
buttons on the TV or on the
remote control.
Pressing the
▲
buttons advances to higher channels,
▼
button to lower channels.
Channels can be selected directly by using the 10-digit Keypad on the Remote Control.
Examples : To select Channel 5, press "0" first, than press "5". (Be sure to press "0" first).
(4) Press VOLUME (
▲
/
▼
) button
On either the Remote Control or on the TV SET to adjust volume
to your desired listening lever.
The volume level is indicated on the screen
by reference number (0-63) and by bar scale as shown.
1. LCD TV ASSEMBLY
•
Install LCD A ssembly with 4 screws.
2. LCD MONITOR HOLE DIMENSIONS
1 5
TV OPERATION
INITIAL PREPARATIONS
BASIC OPERATION PROCEDURE
NOTE : The volume level can be muted instantly by pressing MUTE button on the Remote
Control. See “MUTE Button” on page 22.
( 1 )
( 3 )
( 4 )
1 4
SET UP FOR CAR USE
W A R N I N G
UNDER NO CONDITION SHOULD THE LCD DISPLAY BE MOUNTED IN ANY POSITION
WHERE A PICTURE MIGHT BE VISIBLE TO HE DRIVER. EVEN IN THOSE CASES
WHERE SUCH AN INSTALLATION IS NOT PROHIBITED BY LAW, DOING SO MIGHT
INCREASE THE LIKELIHOOD OF A SERIOUS ACCIDENT.
N O T E S :
The DC Power plug should not be accessible to
the consumer.
When the components are mounted with screws,
be certain that the thickness of the mounting mate-
rial is as follows:
Wood : 10mm or more.
Metal : 3mm or more.
Plastic : 4mm or more.
( 4 )
( 3 )
In case of TV SET.
Press the “MENU” button and select “VOLUME”
option, then press the CHANNEL
▲
/
▼
button.
VOLUME 3 3
( 2 )