1 3
DOME LIGHT CONNECTION
(1) “NEGATIVE” Type Door Circuit
Red wire
- 12 volt constant power.
Brown wire - Chassis ground.
This wire provides a ground to the dome light circuit when the three (3) position switch is
in the “on” position. If this wire is not connected the dome light will not operate when the
switch is in the “on” position.
White wire - Negative door switch.
This wire connects to the negative door switch. This wire should be locate in the head
liner where the factory dome light was removed. When one of the doors are opened on
the vehicle this wire will have continuity (shorted) to ground.
(2) “POSITIVE” Type Door Circuit
Red wire
- Chassis ground.
Brown wire - 12 Volt constant power.
A constant power lead may have to be run up to the head liner area for this connection.
Check all wires for constant power that were attached to the factory dome light.
White wire - Positive door switch.
This wire attaches to the positive door switch wire. This wire should be located in the
head liner area where the factory dome light was removed. When one of the doors are
opened on the vehicle this wire will have 12 volt power on it.
AUDIO SYSTEM
•
Audio output is Monophonic when receiving on-air broadcast signals.
•
Audio output is Stereo when a stereo audio signal is fed from external audio equipment that is con-
nected to the [selected] A/V1 or A/V2, A/V3 Input terminals.
•
The SPEAKER JACK teminal is a high level output whose sound level is Variable up to 0.7W max-
imun when connected to a 4-ohm speaker.
VIDEO SYSTEM
•
This model incorporates 3sets of AUDIO/VIDEO INPUTS (A/V1 & A/V2, A/V3 for direct connection
of 3 external program sources (Video Game, Camcorder, Video Player, etc.).
•
Direct connection results in superior video quality from the connected program sources.
•
Refer to the instruction manual supplied with each external instrument for details.
1 2
SIGNAL CONNECTION
POWER CONNECTION
CONNECTING TO CAR POWER
NOTE : The cable assembly used to connect the L,M64 to the 12-Volt power supply varies
depending on product packaging.
NOTE
MANUFACTURER : TEASUNG ELECTRIC CO.,LTD. TYPE# : AWM STYLE 1015
W A R N I N G
The DC Battery Cord is ONLY for use with this model.
Do not use it to power any other product
F R O M
RED : DC12V
CAR BATTERY
BLACK : GROUND
POWER Connections
RED : +12V DC
BLACK : GROUND
Red, Brown, White and Leads
These leads provide power for the dome light circuit. The LSM64 is configured to be
used with vehicles that use a “negative” type door dircuit. However, the LSM64 can be
reconfigured for vehicles that use a “positive” type door circuit. Most import and
domestic vehicles utilize a “negative” circuit. Ford and Lincoln/Mercury vehicles are
usually “positive” type circuits. Check your specific vehicle for the type of circuit it uti-
lizes before proceeding with the installation.
