(1) QUICK VIEW Button
Press the Q. VIEW button
on the Remote Control.
The previously viewed channel will appear on the screen.
Press Q. VIEW again to switch back to the original channel.
Repeatedly pressing Q. VIEW switches between these two channels.
(2) DISPLAY Button
Press the DISPLAY button
on the Remote Control.
The channel number of the program you are now viewing and
the setting of the SLEEP TIMER are displayed as shown
(3) SLEEP Button
You can select a time period between 15 and 180 minutes after which the
television will automatically switch to power-off mode.
Repeatedly pressing the SLEEP button on the Remote Control cycles the SLEEP time as
shown below.
NOTE :
To cancel the sleep timer function, press the SLEEP button repeatedly until the word "SLEEP
OFF" is displayed.
Q. VIEW
D I S P L A Y
2 1
MORE USEFUL FUNCTIONS
4 5
SLEEP 3 0
By pressing the STATUS button on the Remote Control, you can sequentially select any one of four
possible preferred picture settings.
•
As this button is repeatedly pressed, the mode will be changed as follows.
(1) USER mode
(2) STANDARD mode
(3) DYNAMIC mode
(5) NO DISPLAY
(4) MILD mode
P I C T U R E
M O D E
•
Select this mode to view a picture that you
adjust to your own personal taste.
•
Select this mode to restore picture
adjustments to the normal factory-preset
m o d e .
•
Select this mode to view a powerful and
clear picture. Intended especially for view-
ing in brighter(daylight)environments.
•
Select this mode to view a milder picture.
Intended especially for viewing in darker
(nighttime) environments or to lessen eye
f a t i g u e .
S T A N D A R D
U S E R
D Y N A M I C
M I L D
2 0
S TATUS BUTTON
O F F
1 5
3 0
4 5
6 0
9 0
1 2 0
1 5 0
1 8 0
