AUDIO SYSTEM
The Audio Outputs always feed a low-level audio signal from the selected input.
The Audio Outputs feed a Monophonic signal whenever the selected input source has a Monophonic
audio signal (e.g. a monophonic broadcast from the built-in TV Tuner, or the signal from a Monophonic
VCP connected to the A/V 1, 2 or 3 input terminals).
The Audio Outputs feed a Stereo signal whenever the selected input source has a Stereo audio signal
(e.g. a stereo broadcast received by the built-in TV Tuner, or the signal from a Hi-fi Stereo VCP or DVD
that is connected to the A/V 1, 2 or 3 input terminals).
The EXTERNAL SPEAKERS OUTPUT CONECTOR feeds a high level mono or stereo signal whose
level is Variable up to 2.0W maximum when connected to 4-ohm speakers.
IR (Infrared Rays) Transmitter
The built-in IR Transmitter allows you to listen to the Stereo or Monophonic audio signal from the selected
program source (TV, A/V1, A/V2 or A/V3) on IR Wireless Headphones manufactured by Unwired
Technology LLC. We do not offer these headphones ourselves, but they are widely available under the
Unwired
brand name. Headphones sold under other brand names that are compatible with Unwired
may also be used. The IR signal is always live.
Wireless FM Transmitter
The built-in FM Broadcast Transmitter allows you to listen to the Stereo or Monophonic audio signal from the
selected program source (TV, A/V1, A/V2 or A/V3) on the FM Band of the vehicle's radio or on headphones
equipped with an FM tuner. See page 20 of this manual for a full description and details of operation.
VIDEO SYSTEM
This model incorporates 3 sets of STEREO AUDIO/VIDEO INPUTS (A/V1, A/V2, & A/V3 for direct) connection
of up to 3 external program sources (Videocassette Player, Video Game, DVD Player, Camcorder, etc.).
Direct connection results in superior video quality and should be used whenever the external program source
provides direct outputs. Refer to the instruction manual supplied with each external instrument for details.
12
SIGNAL CONNECTION (continued)
IR TRANSMITTER
TRANSMITTER POSITIONING
SELECTING THE PROGRAM SOURCE
Press the TV/VIDEO button on the Remote Control or LCM104 Control Panel to select the desired
program source. Repeatedly pressing the button will switch between inputs as follows:
Broadcast TV (built-in)
A/V 1
A/V 2
A/V 3
Broadcast TV ......
11
SIGNAL CONNECTION
This illustration shows only one possible example of external equipment connection. For a more detailed
understanding of each connection, please refer to the instruction manuals supplied with each component you
plan to connect.
External Speaker
(4 ohms 2)
External Speaker
Extension Cable (15 foot)
A/V 2 INPUTS
GAME, CAMERA,
DVD, ETC.
A/V 1 INPUTS
KEC Mobile
Application VCP
Extension Cable
15 foot)
A/V 3 INPUTS
GAME, CAMERA
DVD, ETC.
A/V OUTPUTS
Be sure to disconnect POWER before making any connections.
Audio/Video Jack Color Code:
Yellow = Video
Red
= Right Audio Channel
White = Left Audio Channel
FRONT VIEW
REAR VIEW
VHF/UHF
ANTENNA
75-ohm
Coaxial Cable
12V DC Input
This 15 foot cable simplifies connection and installation of the primary program source. If a KEC Mobile
Applications Videocassette Player is used as the A/V1 program source, only this single cable is need-
ed as it supplies 12V power to and receives signal from the VCP.
Connector
Connect To
10-Pin Mate & Lock
LSM104 10-Pin Mate & Lock Connector
2-Pin Mate & Lock
KEC VCP 12V Power Input (Designed to provide power to KEC products ONLY)
RCA Plug Yellow (Male) A/V1 Video Output
RCA Plug Red (Male)
A/V1 Right Audio Output
RCA Plug White (Male) A/V1 Left Audio Output
Mini Phone Plug (Male) KEC VCP R-Link Input/Output
