19
20
21
5
10
11
12
13
14
15
16 17 18
8
IDENTIFICATION OF LSM104 CONTROLS AND CONNECTOR
Note :
FRONT VIEW
REAR VIEW
1.
DC INPUT JACK
For connection to source of 12 Volt DC power.
2. EXTERNAL SPEAKERS OUTPUT CON-
NECTOR
Supplies 2.0 W/Channel @ 4ߟ (variable) for
connection of optional external speakers. Use
with supplied External Speaker Extension Cable
(L&R+ & Common Ground).
3. L&R AUDIO/VIDEO (THROUGH) OUTPUT
JACKS
Supplies L&R Audio and Video signal for connec-
tion to additional monitors, external amplifiers,
etc.
When the screen is lowered, these outputs
always feed the signal from the selected input
source.
When the screen is in the closed position, these
outputs always feed the signal from the program
source connected to A/V1.
4. AUDIO/VIDEO 1 EXTENSION CABLE CON-
NECTOR
For connection of supplied 15 foot L&R
Audio/Video 1 Extension Cable. The Extension
Cable receives A/V signals from and supplies 12
Volt DC Power & R-Link Connection to KEC
Mobile Applications VCP's.
5.
AV3 INPUT JACK
For connection of a 3rd program source.
6. LAMPS
SWITCH
Selects lighting mode.
7. LAMPS
Provides additional vehicle lighting.
8.
LCD PANEL DROP-DOWN BUTTON
Push to release LCD Panel from stored position.
9.
LAMP POWER INPUT WIRES
12V Constant, Chassis Ground & Door Switch.
10. AUTO POWER SWITCH
Lowering LCD Panel automatically turns power
on.
11. TV/VIDEO
BUTTON
Selects program source: Broadcast TV, A/V1,
A/V2, A/V3.
12. MENU
BUTTON
Displays on-screen Main menu.
13. PICTURE
BUTTON
Displays on-screen Picture menu
14. CHANNEL DOWN ( ), UP ( ) BUTTONS
Selects the next lower or higher channel stored in
memory.
15. VOLUME DOWN ( ), UP ( ) BUTTONS
Adjusts volume of [optional] speakers wired to
External Speakers Output Connector (#2).
Also used in conjunction with the on-screen
menus.
16. POWER
BUTTON
Press to power the LCD Panel ON/OFF.
17. STAND-BY
INDICATOR
Illuminates to indicate that 12 Volt DC Power is
available, but that LCD screen is not powered on.
18. REMOTE CONTROL SENSOR
Receives control signals from the remote control
hand unit. Also passes controls signals to a KEC
Mobile Applications Videocassette Player that is
connected via an R-Link cable.
19. FM TRANSMITTER ANTENNA
Transmits low-power stereo audio signal for
reception on vehicle's FM Radio.
20. ANTENNA INPUT JACK
For connection of an external television broad-
cast antenna.
21. L&R AUDIO/VIDEO 2 INPUT JACKS
For connection of a 2nd program source.
9