–31–
REFERENCE
KEC MOBI LE APPLI CATI ONS TRI -MODE REMOTE CONTROLLER # RC9799
The Tri-Mode Re mote Controller is packaged wit h most KEC LCD Systems. In addition to full remote
control of t he LCD System, it also provides basic remote control commands for our DVD and Videocasset te
Players.
To control the DVD-2 with the RC9799,
press the DVD MODE butt on.
To change to VCP control, press the VCP
MODE but ton.
Not es:
•
The LCD System cont rol but tons
are always available. They are
not affected by the DVD/VCP
MODE but tons.
•
This unit is not a
universal
remote
controller. It is only designed to
transmit cont rol codes to KEC Mobile
Applicat ions products.
A NOTE TO INSTALLERS CONCERNING THE KEC R-LI NK SYSTEM
Most KEC Mobile Applicat ions video product s (TV, LCD, VCP & DVD) employ our R-LINK System. This
allows all of our components to be remote cont rolled even if some of the components are hidden from view.
If you are installing the DVD-2 along wit h one of our TV’s or monitors
and
one of our VCP’s:
1.
Connect an R-Link cable f rom the KEC TV/Monit or to the DVD-2’s R-Link
Input
2.
Connect an R-Link cable f rom the DVD-2’s R-Link
Output
to the R-Link jack on the rear panel of
the KEC VCP.
All KEC component s may now be remot e controlled by point ing
any
of t he KEC remote cont rollers at the
remot e sensor on
any
of the KEC components.
Please not e that since pairs of KEC Mobile Applications Headrest Monit ors are designed t o be operated
independent ly
of each other, they are
not
equipped with R-Links. Please refer to the installat ion information
acco mpanying our Headrest Monitor Systems f or informat ion on the use of R-Link in conjunction with those
sy st ems.