6
Configuration
6.1
Address setting for the operating panel
Fig.6-1:
Position and setting of the DIP switch on delivery (schematic representation)
The following table shows the possible settings of the DIP switch located on
the back side of the operating panel. The DIP switch setting printed in bold
depict the delivery state.
DIP-Switch
Function
1=OFF, 2=OFF
1=OFF, 2=ON
1=ON, 2=OFF
1=ON, 2=ON
13h
12h
11h
10h
3-5
no meaning
6=ON
Terminating resistor for RS-485-A interface
running
Operating panel
Configuration
© KEBA 2009
Project engineering manual V2.00
33
Summary of Contents for Kemro OP 350/C-1100
Page 4: ......