WARNING!
The digital inputs are not designed for safety-relevant control tasks (e.g. shut-
down in emergency). For safety-relevant control tasks or for personnel security,
additional external safety measures must be realized to ensure the system re-
mains in a safe operating condition even in the event of a fault. For additional
information, please see
chapter 2.3 "Safety instructions for personal safety" on
The digital inputs may only be used for the integration of switches and buttons
or switching elements exclusively. The connection of sensors and other equip-
ment is not allowed.
The nominal voltage of the switch element must amount to 24 V DC. 5 mA is
typically applied by the switching element for closed contact. This is to be taken
into account for the selection of the switching element (e.g. minimal required
current for elements with silver contacts).
The digital inputs may only be supplied with the intended power supply on the
operating panel of 24 V DC "V
Out
", an external supply of the digital inputs is not
allowed.
Additional digital inputs are made available through the connection of an input/
output module XE 040/x. Please refer to the project engineering manual "XE
040/A, XE 040/B, input/output module" for a precise description.
5.4.1
Plug specification
Connection terminals: 20-pole male connector (Weidmüller SL-SMT 5.08). The
necessary female connectors are not included in the scope of delivery of KE-
BA.
Cross section according to manufacturer specifications:
Connectable conductor
Cross-section
Clamping range min.
0.08 mm²
Clamping range max.
1 mm²
AWG, min.
28
AWG, max.
18
single-wire, min. H05(07) V-U
0.2 mm²
single-wire, max. H05(07) V-U
1 mm²
finely-stranded, min. H05(07) V-K
0.2 mm²
finely-stranded, max. H05(07) V-U
1 mm²
with wire sleeves according to DIN 46 228/1,
min.
0.13 mm²
with wire sleeves according to DIN 46 228/1,
max.
0.34 mm²
with AEH with collar DIN 46 228/4, min.
0.13 mm²
with AEH with collar DIN 46 228/4, max.
0.34 mm²
Operating panel
Connections and wiring
© KEBA 2009
Project engineering manual V2.00
27
Summary of Contents for Kemro OP 350/C-1100
Page 4: ......