1.3
Intended use
The FM 280/A was developed for control applications in industrial machines.
The typical applications areas include injection molding machines, robots,
presses, machine tools and similar.
The FM 280/A does not conform to the EMC directive with regards to emissions
in living areas.
The FM 280/A has been developed, manufactured, tested and documented in
accordance with the appropriate safety standards. Therefore, the products do
not pose any danger to the health of persons or a risk of damage to other
property or equipment under normal circumstances, provided that the instruc-
tions and safety precautions relating to the intended use are properly observed.
1.4
Notes on this document
This manual is integral part of the product. It is to be retained over the entire
life cycle of the product and should be forwarded to any subsequent owners
or users of the product.
1.4.1
Contents of the document
●
Description of the FM 280/A
●
Description of wiring (including EMC guidelines)
●
Technical data
1.5
Documentation for further reading
The following documents are to be observed depending on the system solution
used:
If you are using the KeStudio U2 tool suite:
Doc.No.
Name
Target group
DE: 65352
EN: 65353
K2-200 automation system manual
●
Project engineer
●
Electrician
●
Programmer
●
Commissioning foreman
●
Service technician
If you are using the KeStudio U3 tool suite:
Introduction
FM 280/A
© KEBA 2011
Project engineering manual V1.02
8
Summary of Contents for Kemro FM 280/A
Page 4: ......
