1
Introduction
1.1
Purpose of the document
This document describes the structure of the FM 280/A
(SERCOS II Interface Module).
Information
This manual is not adressed to end costumers! Necessary safety notes for
the end costumer have to be taken into the costumer manual in the respective
national language by the machine builders and system providers.
1.2
Preconditions
This document contains information for persons with the following skills:
Target group
Knowledge and skills pre-requirement
Project engineer
Basic technical training (University of Applied Science/University level,
engineering degree or corresponding professional experience).
Knowledge in:
●
working mode of a PLC,
●
safety regulations,
●
the application.
Operator
Basic technical training (Vocational high school, engineering degree or
corresponding professional experience).
Knowledge in:
●
safety regulations,
●
working mode of machine or plant,
●
principal functions of the application,
●
system analysis and troubleshooting,
●
setting options at the operating installations.
Service technician
Basic technical training (Vocational high school, engineering degree or
corresponding professional experience).
Knowledge in:
●
working mode of a PLC,
●
safety regulations,
●
working mode of machine or plant,
●
diagnosis possibilities,
●
systematic error analysis and rectification.
FM 280/A
Introduction
© KEBA 2011
Project engineering manual V1.02
7
Summary of Contents for Kemro FM 280/A
Page 4: ......
