background image

 

© KEBA 2013-2023 

 

Specifications are subject to change due to further technical developments. Details presented may be subject to correction. 
All rights reserved. 

 

Document: Revision 3.00 / Article no.: 92651 

 

KEBA Energy Automation GmbH

:  

Reindlstraße 51, 4040 Linz, Austria 

 

+43 732 7090-0, 

 

+43 732 7309-10, 

 [email protected] 

 
For information about KEBA and our subsidiaries please look at www.keba.com. 

Comments to this manual 

In this manual you will find warnings against possible dangerous situations. The used symbols apply 
to the following meanings: 
 
 

 

Notice 

Notes on use of equipment and usefu

l practical tips are identified by “Notice". Notices do not con-

tain any information that draws attention to potentially dangerous or harmful functions. 

 
 
 

Concerning this manual 

This manual is intended for use by customers and personnel with the relevant technical knowledge in 
the applicable area and appropriate to the operations they are required to perform. 
 
Target group: 

 

Customers/personnel with some programming knowledge 

 
 
 

List of changes 

Version: V3.00  Date: 09.01.2023 

Page 

Description 

Removed all content related to P30 because there is a separate document available 

Removed all content related to third party companies 

Introduced new company name 

“KEBA Energy Automation GmbH” 

 
 
 

Summary of Contents for KeContact P20













Reviews: