manualshive.com logo in svg

Keba KeContact M20, Operating Manual, Page: 29 / 64

Share
Download
Keba KeContact M20 Operating Manual Download Page 29

M20

Connections and wiring

V1.02

29

© KEBA 2022

6.5

Antenna

The antenna connectors are on the front of the module. An antenna can be
attached directly to the device (for wall installation) or via cable (for control
cabinet installation). The antenna is included in the scope of supply.

Fig. 6-13: Antenna for control cabinet

6.5.1

Mounting the antenna

CAUTION!

Danger to life from electromagnetic fields

To adhere to the limit values for people's exposure to electromagnetic fields,
it is necessary to mount the antenna at least 25 cm away from people.

Mounting the antenna directly on the device

To mount the antenna, proceed as follows:

1) Switch off devices connected to the KeContact M20 and disconnect their

power cables.

2) Tighten the antenna (

2

) at the antenna connection (

1

).

The antenna has been installed.

Mounting the antenna on the control cabinet

To mount the antenna, proceed as follows:

1) Switch off devices connected to the KeContact M20 and disconnect their

power cables.

2) Unscrew the locknut and remove it and the washer from the antenna.

3) Feed the antenna cable into the control cabinet through a predrilled hole

(for M10 screw).

Summary of Contents for KeContact M20

































































Reviews:

No comments