Keba KeContact E10, Instructions Manual, Page: 15 / 34

E10 Mounting and installation instructions
V1.00
15
© KEBA 2023
6 Mounting and installation instructions
6.1 Space requirement
The device must be installed with the following clearances to the surround-
ings.
Fig. 6-5: Space requirement, specified in mm
6.2 Mounting the device
The KC-E10 is intended for installation on a horizontal mounting rail in a
control cabinet.
To mount the device in the control cabinet, proceed as follows:
1) Hook the device into the upper edge of the top hat rail and press down
until the housing latches completely.
The device has been mounted.