PLEASE NOTE: REFER TO PAGE 2, “DETERMINING UNIT TYPE,”
BEFORE PROCEEDING.
• TYPES
09 AND 16 MUST BE RETURNED TO KEB AMERICA FOR
ADJUSTMENT.
1. For type 10, engage the brake by supplying the proper DC voltage to
the brake magnet. For type 06, no power is required.
2. Remove the access plugs from each side of the Combibox.
3. Loosen the two lock nuts (See Figure 5).
4. Insert the feeler gauge between the clutch magnet and the armature.
Tighten the adjusting screws(clockwise) until the nominal air gap is
reached. The air gap should be equal on each side (See Figure 6).
5. Tighten the lock nuts.
6. Screw the plugs back into the access holes.
Figure 5
Figure 6
ADJUSTING INSTRUCTIONS
5