TABLE OF CONTENTS
DETERMINING UNIT TYPE ..................................................................... 2
INSTALLATION & WIRING ....................................................................... 3
PERMISSIBLE SHAFT LOAD .................................................................. 4
OPERATION & MAINTENANCE .............................................................. 4
ADJUSTING INSTRUCTIONS ................................................................. 5
REPLACEMENT & REPAIR PROCEDURE ............................................. 6
ELECTRONIC CONTROLS & ACCESSORIES ....................................... 6
EXPLODED VIEW XX.10.670*................................................................. 7
EXPLODED VIEW OF XX.10.370*........................................................... 8
*XX denotes Size
For further information please contact KEB AMERICA, Inc. at 1-952-224-
1400.
DETERMINING UNIT TYPE
In order to properly mount and wire the KEB Combibox, it is necessary to
identify the type of the unit. To do this, find the part number of the unit, which
is located on top of the terminal box. It should be in the following format:
XX.YY.ZZZ (Example: 06.10.370)
YY indicates Type as follows:
The clutch rotor transmits the power from the input to the output by making
secure frictional contact with the armature. The armature is fastened to the
output shaft. The arrow on the Combibox housing always points from the
input (clutch side) to the output (brake side). Mount the unit accordingly!
2
Combibox Instruction Manual