INSTALLATION & WIRING
When direct DC voltage is supplied
to the Combibox, the terminal strip
shown in Figure 1 will be mounted
in the conduit box.
Polarity in the clutch and brake is
not relevant when wiring type 09,
10, and 16, but it is relevant when
wiring the type 06 Combibox. The
green wire with the red stripe is
positive and the green wire with the
blue stripe is negative.
When AC power is supplied to the Combibox, a rectifier will be used in place
of the terminal strip. See Figures 2 and 3 for possible wiring configurations
for a type 09 or 10 Combibox. See Figure 4 for the wiring configuration for
a type 06 or 16 Combibox.
Figure 2
Figure 3
There are two basic rectifiers avail
-
able for clutch/brake combination:
• 02.91.020-CE07 for 110VAC/
95VDC, bridge rectifier
• 02.91.010-CE07 for 220VAC/
95VDC, half wave rectifier.
Figure 4
Relays for switching should be
rated at least 250VDC/10A
3