KEB C6 E22 BM-RVL, Instructions For Use Manual

Page: 64 / 114

64
OPErATING SySTEMS
Under the Volume: you see the states of the selected volume as read-only fields:
• Overlay Type: On KEB devices always RAM-REG
• EWF Status: Current status of the EWF
• EWF Boot: Command which will be performed with the next reboot
On the right side you see the EWF Control commands, each with a help button aside
(the commands which are not available in the current constellation are greyed and di-
sabled):
• Enable: Enables a currently disabled overlay on the specified EWF-protected volu -
me. This function requires a reboot.
• Disable: Disables a currently enabled overlay on the specified EWF-protected vo -
lume. This function requires a reboot.
This function is not available at all for the volume C:\ which holds the registry,
because the change in the registry for the new state of EWF cannot become
persistent. Use ‘CommitDisable live’ instead to disable EWF for C:\
• Commit: Commits all current level data in the overlay to the EWF-protected volu-
me. This function requires a reboot. After the reboot the EWF status of the volume
is still “ENABLED”.
WArNING
All changes on the volume since the last reboot become effec-
tive. Do not execute this if you are not sure about the extent of the
changes.
• CommitDisable live: Immediately commits all current level data to the EWF-pro-
tected volume and then disabled EWF. This function does NOT require a reboot.