KEB C6 E22 BM-RVL, Instructions For Use Manual

Page: 62 / 114

62
OPErATING SySTEMS
These dependencies are handled by the KEB_WF_Mgr internally. Thus it is
not necessary to understand this table completely or to use it as a reference
when using the EWF, but keep in mind that there are dependencies because
some internal operations of the KEB_WF_Mgr has to be confirmed by the user.
4.2.5 Delivery state of EWf on KEB devices
On KEB Windows Embedded Standard 7 image, EWF is disabled by default at shipment
because some settings has to be made on the drive respective in the registry by the user
(e.g. IP address setting).
Every time WES7 starts with EWF disabled for volume C:\ the user is reminded to ena-
ble the EWF by the following message box:
After all settings to the registry are done you can directly active the EWF for volume C:\
by clicking ‘Yes’. The device will reboot immediately and the EWF is enabled for volume
C:\.
If you click “No” the message box is closed but will be appear again after the next reboot.
Please note that the volume E:\ which holds the application data is not protectable by
this way.