Q.5.42 June 2018
Page 8
KE2 Local Area
Dashboard & Alarms
Overview, Installation, and Setup Instructions
© Copyright 2018 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Click within the grey area to
make changes to a setpoint.
6
Setting a setpoint outside of the
limits
will return a “Validation failed”
message.
7
For any changes to ModBus set-
points or device_name changes
you will be prompted for the
ModBus Device Login.
Defaults are ke2admin & ke2ad-
min, unless they were changed
on the authentication screen.
NOTE: This is a one time login
for your active session. The first
setpoint that’s changed prompts
you for the password. Additional
setpoint changes on that control-
ler, or other ModBus controller’s,
will not prompt for the password.
8
8
6
7
7a
Advanced View
5
Click on the ? in any of the set-
point areas to show the limits for
those setpoints.
For example Room Temperature.
5
9
For security purposes, Logout when finished
making all ModBus changes.
The Success image will display to verify that
you have successfully logged out.
10
7a
9
10
