KE2 Therm Solutions KE2 LDA, Overview, Installation, And Setup Instructions

Page: 4 / 16

Q.5.42 November 2016
Page 4
KE2 Local Area
Dashboard & Alarms
Overview, Installation, and Setup Instructions
© Copyright 2016 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Installing the KE2 LDA: Option 5
Connection via WiFi
EACH DEVICE MUST HAVE A SEPARATE/
UNIQUE MODBUS ADDRESS
(See Appendix B for instructions)
KE2 Switch to LAN
KE2 Evaporator Efficiency
TM
therm solutions
ENTER
BACK
.
KE2 Evaporator Efficiency
TM therm solutions
ENTER
BACK
.
Connect Customer Network
STATUS
All Clear Evaporator Fan
Off
Plug power cable into the KE2 LDA
and the other end into an electrical outlet.
The unit will power on automatically.
Connect wirelessly
to the LDA Network
ABC Contracting
(888)555-3358
System Mode
Cool
Superheat
0.0 F
Suct Pressure
96.2 F
Suct Temp
87.7 F
WAN
Power
LAN
.
KE2 Evaporator Efficiency
TM therm solutions
ENTER
BACK
.
KE2 Evaporator Efficiency
TM therm solutions
ENTER
BACK
.
Ethernet Controllers:
KE2 Evaporator Efficiency,
KE2 Evap for Rack Efficiency,
KE2 Controlled Environment
NOTE: DHCP or Static IP in Customer Network
WiFi to PC/Laptop,
Tablet, Phone
Serial-Modbus Controllers:
KE2 Temp, KE2 Low Temp
KE2 Adaptive Control
.
Hold for manual defrost
therm solutions
KE2 Temp
Hold for manual defrost
therm solutions
KE2 Temp
.
• KE2 Evaporator Efficiency, KE2 Evap for
Rack Efficiency,
or KE2 Controlled Environment
•
DHCP Enabled or set address from
192.168.50.2 to 192.168.50.99
•
Check IP address from front panel if DHCP
•
Factory assigned 10.10.x.x addresses are
now visible when connected to the LAN
port. However, 10.10.x.x controllers can
only be managed by PC, phone, or tablet
when wirelessly connected to the KE2 LDA
or hardwired to the KE2 Switch.
Using the KE2 Flash Drive for Data Logging
the KE2 LDA
(See bulletin Q.5.48 for more on the KE2 Flash Drive)
Connect customer
Network to WAN
WAN
Power
LAN
.
KE2 Evaporator Efficiency
TM
therm solutions
ENTER
MODIFY STATUS
ABC Contracting
(888)555-3358
All Clear
Compressor
On
System Mode
Cool
Evaporator Fan
Off
Room Temp
-8.5 F
Coil Temp
15.4 F
Sat Temp
46.0 F
Superheat
0.0 F
Valve Position
Manual
Suct Pressure
96.2 F
Suct Temp
87.7 F
Dig Input 3
Dis
Defrost
Off
Aux Temp
Dis
Dig Input 1
Closed
Dig Input 2
Dis
KE2 Evaporator Efficiency
TM
therm
solutions
ENTER
BACK
.
Ethernet Controllers:
KE2 Evaporator Efficiency,
KE2 Evap for Rack Efficiency,
KE2 Controlled Environment
Serial-Modbus Controllers:
KE2 Temp, KE2 Low Temp
KE2 Adaptive Control
.
Hold for manual defrost
therm solutions
KE2 Temp
Hold for manual defrost
therm solutions
KE2 Temp
.
USB Hub
KE2 Flash
Drive
For data logging up to 10
Ethernet or Serial-Modbus controllers
Regardless of how the KE2 LDA is connect-
ed to the network (as illustrated in Options
1 through 5) , if the KE2 Flash Drive is used
for data logging, the USB Hub is connect-
ed first. Then the KE2 Flash Drive, and the
daisy-chained Serial-Modbus controllers,
are connected to the ports in the USB Hub.
KE2 Flash Drive Kit
(pn 21146)
KE2 Flash Drive USB Hub