８
used for new battery or the battery which has stored for a long time,It is recommended to set to
：
NiMh Cycle
DCHG>CHG 3
Discharge, and then charge, do this for 3 times, it will work after the last charge .
2.) Loading the data
in the interface of loading data:
Program Select
Load Data
Press Start / Enter button
，
it will display
：
Load[01] ****
*.*V ****mAh
The figure 01will glitter
Press Dec. <or Inc. > button to the data number you need, and then press Start / Enter for long ti
，
it will display:
Load...
come back to the main interface after loading the data successfully
：
Program Select
Li** Batt
