４
If battery connect is incorrect, it will display:
Connection Break
If connecting correct, it will display:
The top line:
R: *Ser S: *Ser ( Note:
R: *SER is the number of battery cells which charger inspect
automatically, S: *SER is the number of battery series you set up, if those numbers are different,
don’t start to charge, and avoid damaging battery)
The low line: switch between
Cancel(Stop) and Confirm(Enter)
Now please press Start / Enter button to start charge, while press Satt. Type / Stop button to cancel
charge, and return to setup interface
Charge interface:
Li*S *.*A *.**V
BAL ***:** *****
First line: lithium battery cells number, prompt charge current, prompt battery total voltage
Second line: charge indication, charge consuming time, electricity capacity charged
Charge indication: it display BAL during charge, while FULL after charging completely
During charging, you can press Batt. Type / Stop button at any moment to stop charging
During charging, you can press Dec. > button at any moment to browse separate voltage of each
single battery
During charging, you can press Inc. < button to browse each enactment parameter at any moment
2.) discharge
Go on pressing Inc. > button in the main menu of charge & discharge for lithium battery, the
screen will display the following interface:
LiPo Discharge
*.*A *.*V(*S)
Press Start / Enter button to choose discharge function(s)
Operation method is the same as that of charge, just to correctly set up discharge current and end
voltage, increase or decrease voltage by multiple of 3, while set 6.0V(2S) for 7.4V lithium battery
Note: discharge connector and balance charge connector have to be connected at the same time,
then you can charge or discharge lithium battery
supplement: LiPo Charge / LiPo Fast CHG is used for charging lithium polymer battery without
balance connector and lithium polymer fast, but not for battery with balance **. Because lithium
battery core has specific voltage limitation, you must use balance charger to do balance charging
on voltage to avoid any danger because of one piece of low voltage while another voltage too high
LiPo Storage function is to store lithium battery, if you don’t want to use lithium battery for long,
please charge this lithium battery fully, and then use this function, discharge to the voltage for
long storage, the method of usage is similar with that of charge, the difference is the maximum
