background image

Congratulations on your purchase of the Agile 7.2 radio controlled helicopter kit. Agile 7.2 was designed in Europe by Eng. Gaziano 
Roberto and is proudly manufactured by KDS Model. Our goal was to offer you something different with a minimum of parts, easy 
maintenance, and outstanding flying performances. 
It’s time to fly different!...

IMPORTANT NOTES

NOTE FOR ASSEMBLY

R/C helicopters, including the AGILE 7.2 are not toys. R/C helicopters utilize

 

various high-tech products and technologies to provide 

superior performance.

 

Improper use of this product can result in serious injury or even death. Please read

 

this manual carefully 

before  using  and  make  sure  to  be  conscious  of  your  own

 

personal  safety  and  the  safety  of  others  and  your  environment  when 

operating  all  AGILE  products.  Agile  7.2,  KDS  Model,  their  affiliates  and  authorized  distributors  are  not  responsible  for  personal 
injuries to the operators and others, and property damages that could occur from the assembly, maintenance or your use/misuse of 
this product.  Always respect the rules provided by your local remote control aircraft organization. 

The following manual provide important instructions to correctly assemble the model. It is structured in a logical way, based on the work 
done in previous step. If you change the order, it may result in additional or unnecessary steps. So we suggest you to read this user manual 
very carefully to understand correctly the assembly procedure. Failure to do so may not only downgrade performances but also increase 
the risk of danger. Apply thread lock as indicated, allow the threadlock to cure before mounting parts. It is recommended to use threadlock 
on each bolt or screw that are engaged with metal parts.

   LOCATE AN  APPROPRIATE  LOCATION 

R/C  helicopters  fly  at  high  speed,  thus  posing  a  certain  degree  of  potential  danger.  Choose  an 
appropriate flying site consisting of flat, smooth ground, a clear open field, or a large open room, such 
as gymnasium or warehouse without obstacles. Do not fly near buildings, high voltage cables, or trees 
to ensure the safety of yourself, others and your model. Do not play your model in inclement weather, 
such as rain, wind

snow or darkness.

   OBTAIN THE ASSISTANCE OF AN EXPERIENCED PILOT

Before  turning  on  your  model  and  transmitter,  check  to  make  sure  no  one  else  is  operating

 

on  the 

same  frequency.  Frequency  interference  can  cause  your  model,  or  other  models  to

 

crash.  The 

guidance provided by an experienced pilot will be invaluable for the assembly,

 

tuning, trimming, and 

actual first

 

flight(recommend you to practice with computer-based

 

flight simulator).

1.INTRODUCTION

2.SAFETY NOTES

During  the  operation  of  the  helicopter,  the  main  rotor  will  be  spinning  at  a  high  rate  of  speed.  The 
blades  are  capable  of  inflicting  serious  bodily  injury  and  damage  the  environment.  Be  conscious  of 
your  actions,  and  careful  to  keep  your  face,  eyes,  hands,  and

 

loose  clothing  away  from  the  blades. 

Always fly the model a safe distance from yourself and others, as well as surrounding objects. Never 
take  your  eyes  off  the  model  or  leave  it  unattended  while  it  is  turned  on.  lmmediately  turn  off  the 
model and transmitter

 

when

 

you

 

have

 

landed

 

the

 

model

.

   ALWAYS

 

BE

 

AWARE

 

OF

 

THE

 

ROTATING

 

BLADES

Agile Helicopter is a Trademark of Flight Research Rc Europe , Proudly made by KDS Model Shenzhen

Page 01

Enjoy the built and have a great time with you Agile 7.2! 

Summary of Contents for AGILE 7.2




































Reviews: