Saf
ety P
recautions
●
The product's keypad (touch area) can be operated with your
fingers as a touchpad (Touch Pointer). However, in the following
cases, the touch area may not respond to touch operation. These
may also result in malfunction.
•
with gloves on
•
with fingernails
•
with another object placed on the operation area
•
with a protective film or sticker adhered
•
with any water or condensation on the touch area
•
with wet or sweaty fingers
•
under water
●
Never use modified au cell phones. Use of a modified device
violates the Radio Law and Telecommunications Business Law.
The product has acquired such certification as conformity with
technical regulations for a specified radio station based on the
Radio Law and conformity with technical regulations for a terminal
device based on the Telecommunications Business Law, and the
"Technical Conformity Mark
" can be confirmed internally in the
product.
When the standby screen is displayed, press
k
→
[Settings]
→
[More settings]
→
[About phone]
→
[Compliance information]
If the product is disassembled and modifications are made to the
internal components, the certifications of conformity with technical
regulations will become invalid. Never use the product without
these certifications valid. Doing so violates the Radio Law and
Telecommunications Business Law.
●
Take care not to place magnetized items such as magnetic cards,
speakers and TV sets near the product, as it might cause
malfunction.
Putting strong magnetism close to the product might cause false
operation.
●
When you put the product in your pocket or bag, take care so that
the display does not come in contact with metal objects or other
hard objects, as it might cause scratching or damage. Straps with
metal or other hard parts that may come in contact with the display
may cause scratching or breakage.
●
When suddenly brought into a warm place from a cold place, or
when in a humid location, or when used where temperature
suddenly changes (e.g. near the air discharge port of an air
conditioner), water drops (i.e. condensation) sometimes are formed
inside the product. Note that when used under conditions such as
this, humidity might cause corrosion or a fault.
●
When wiping the display, wipe with a soft, dry cloth. Use of a
moistened cloth, glass cleaner or other similar liquid might cause a
fault.
●
When connecting/disconnecting an external device to/from the
external connection terminal make sure to insert/remove the
connector of the external device straight to/from the terminal.
●
Note that applying unnecessary force with an external device
connected to the external connection terminal may cause damage.
●
Do not exert excessive force when attaching/removing a microSD
memory card. Doing so might injure your hands or fingers.
●
While writing/reading data to/from a microSD memory card, do not
subject the product to vibration or impact, remove the battery pack,
or turn off the power. Doing so might cause loss of data or a fault.
●
Do not remove the black sheet on the inside of the back cover.
Doing so may prevent Osaifu-Keitai
®
from reading/writing properly.
●
Covering the microphone with your fingers, etc. prevents your voice
from being clearly heard by the other party.
●
Covering the light sensor with your fingers, a sticker, etc. may
prevent the light sensor from responding to the surroundings and
operating properly.
22
