28592_EDEK
ZA0044-0224-1_EN
30
The separate security docu-
mentation for administrators
describes all security-relevant
system settings for setting up
and operating the device and the
entire PQ system (requirement of
the BDEW Whitepaper).
In the active security mode it is recommended
to password the display in addition to the
encryption.
4.3.13 Wizard End of commissioning
Accept settings:
At this point all settings for the device can be
accepted or the setup wizard can be can-
celled.
If the wizard is aborted, the wizard will appear
again and again each time the device is restar-
ted because the necessary basic settings have
not been made.
With the confirmation „Yes“
restarts the device,
the device accepts all changes,
the device deletes all old measurement data
in the device memory,
many parameters are reset to factory
settings.
The measurement campaign is started after
the restart, all recorders are active.
Parameterization
Lock menu
menu password
0000
Setup wizard
Activate settings?
No
Yes
