KBR 18 Operating Instructions And Assembly Manual Download Page 4 | Manualshive

Page: 4 / 12

KBR 18 Operating Instructions And Assembly Manual Download Page 4

23644_EDEBD

A0258-2918-1_EN

4

Low voltage current transformers, multict KBR

Product liability

You have purchased a high-quality product.

Only components of the highest quality and maximum reliability are used.

Each device is subject to long-term testing before it is delivered.

For details on product liability, please refer to our general terms and conditions for elec-
tronic equipment.

The assured device properties only apply if
the device has been operated in accordance with its intended use!

Disposal

Devices that are faulty, obsolete or no longer used must be properly disposed of.

If required, we will dispose of the devices for you.

2. Function Description

Current transformers in the KBR series are inductive, according to the transformer principle
of working, single-ended current transformers. They are used to adapt the primary mea-
sured value to the input nominal values of the connected measuring instruments.

Based on the applied measuring principle, these current transformers are suitable for use
in AC networks only.

The KBR series is suitable only for assembly on insulated primary conductors.

«
...
2
3
4
5
6
...
»

Summary of Contents for 18













Reviews:

No comments