manualshive.com logo in svg

KBR 18, Operating Instructions And Assembly Manual, Page: 2 / 12

Share
Download
KBR 18 Operating Instructions And Assembly Manual Download Page 2

23644_EDEBD

A0258-2918-1_EN

2

Low voltage current transformers, multict KBR

Dear customer

Thank you for choosing a KBR product.

To familiarize yourself with the operation and confi guration of the device, we recommend 
that you read this manual carefully. This way, you will be able to use the entire range of 
functions that this high-quality product has to off er.

The individual chapters explain the technical details of the device and show how to 
properly install and start it up to prevent damage.

This user manual is included in the scope of delivery of the device and must be accessible 
to the user at all times (e.g. in the switchgear cabinet). Even if the device is resold to third 
parties, the manual remains an inherent part of the device.

Although the utmost care has been taken in putting together this user manual, errors 
may still occur. We would be very grateful if you could notify us of any errors or unclear 
descriptions you may notice. The form included in the appendix to this manual can be 
used to send us corrections or suggested improvements.

Yours sincerely,

KBR GmbH Schwabach

1. Safety 

notes 

.................................................3

2. Function 

Description 

...............................4

3. Warnings 

......................................................5

4. Installation 

...................................................6

4.1.  Measuring current inputs .......................6

4.1. Installation instructions ..........................7

5. 

Maintenance and inspection ................7

6. Error 

Recovery 

............................................8

7.  

Technical 

data 

(for exact data, see rating plate) ..........8

7.1.  Technical data (general) ..........................8

7.2. Technical data type-related ................. 10

8. Product 

information 

.............................. 11

Contents

Summary of Contents for 18













Reviews:

No comments