KBL Tower space 2000, Assembly Instructions Manual

Page: 28 / 48

A s s e m b l y I n s t r u c t i o n s | KBL Tower space 2000
28
5.6 Operation using different
audio sources
The tanning device can be operated using the
following audio sources:
• An internal audio source
• Various external audio sources
• All available audio sources
The audio source can be changed via the control
panel.
INTERNAL MP3 PLAYER
When using the internal MP3 player, you can either
play the music tracks that are originally supplied on
the SD card, or you can record your own tracks to
the SD card.
EXTERNAL AUDIO SOURCES - LINE IN
As an external audio source, you can connect
devices ranging from the standard-line level to low
loudspeaker levels.
These sources comprise:
• Studio music
• External players such as MP3 players, mobile
phones (cell phones), I-pods, etc.
EXTERNAL 100 V AUDIO SIGNAL ON STUDIO
CHANNEL (OPTIONAL FEATURE)
If you decide for a connection to a 100 V audio
system, you will need a transformer (KBL no.: 9100
0170 00) for the transmission of the audio signal.
This connection must be made by qualified, trained
and authorized service technicians.
EXTERNAL PLAYERS
A line connection has been integrated into in the
head area near the interior control Panel so that
the user can connect his or her own player such
as an MP3 player, an iPod, etc. Use a stand-
ard 3.5mm jack cable (included if the music
option has been ordered). Connect the jack plug
to the earphone jack of your player. Then select
”MP3 ext.” as the audio source from the inerior
control panel of the tanning device before you start
playing your own tracks from the player. The tracks
can only be selected via the user’s own player.
The volume can be controlled via the control
panel of the tanning device and also via the corre-
sponding operating elements provided by the user’s
player.
5.7 Bluetooth connection
To connect an external player (smartphone etc.) wire-
lessly to the tanning device an optional Bluetooth
interface is available.
CONNECT EXTERNAL PLAYER
A bluetooth connection can be established in standby
and during tanning mode.
Make sure that you are within the recep-
tion area (about 2 meters).
Make sure that your player is configured
to search for other bluetooth devices.
Should this not be the case, enable blue-
tooth manually. To do so, please read the
instructions for your player.
• Depending on your settings the search will be
performed automatically or manually. All available
bluetooth devices within reach will be listed after
a short time.
• Among the available tanning devices choose “KBL
Sound”. In the service menu, a trailing number (01,
02, 03, ...) can be added to tanning device name.
• If necessary confirm the shown code and connect
again. Not every smart phone asks for a code.