A s s e m b l y I n s t r u c t i o n s
|
KBL Tower space 2000
15
• Push the door between the upper and lower crescent of the left side part. The door is attached with the bushing
located on the wire harness
① ②
. Here, ensure that the bushing is installed with flat side positioned as in the
illustration and attached with 2 M5 x 6 mm slotted screws
②
. Then, place the wire harness in the gap
③
. With
the included bushing, attach the door to the lower crescent
④ ⑤
. Here, ensure once again that the flat side is
positioned as in the photo
⑤
. Attach this bushing with 2 M5 x 6 mm slotted screws as well.
①
②
③
④
⑤
Summary of Contents for Tower space 2000
