KBL Tower space 2000, Assembly Instructions Manual

Page: 31 / 48

A s s e m b l y I n s t r u c t i o n s |
KBL Tower space 2000
31
While the tanning device is in standby mode, you can
switch the decorative lighting of the tanning device
on and off and trigger an aquaCool spraying test (1
spraying cycle).
When the tanning device is in service mode, you can
make the presettings for operation in tanning mode,
and you can have values concerning the operation of
the tanning device displayed.
6.1 Layout of the interior
control panel numbers
The buttons of the interior control panel are allocated
double functions. In addition to the standard
operating elements, they stand for numbers that,
in standby mode, provide access to standby and
service functions. Simply enter the corresponding
sequence of numbers on the interior control panel.
1 2 3 4
5
0
9 8
7
6
6.2 Invoking the service menu
CALL SERVICE MENU - START WINDOW
1 6 1
SERVICE MENU - START WINDOW
SERVICEMENU
Enter Servicemenu CODE
> CODE:
In standby mode, the service level is accessed by
entering the factory CODE 1 „00000“, the supplied
CODE 2 or individually defined CODES.
• No incoming signal from the coin-box system.
NOTE
Do not let too much time pass between the individual
keystrokes when entering a sequence of numbers!
6. Service menu