KBL megaSun pureEnergy 5.0, Assembly Instructions Manual

Page: 36 / 44

Sets the high-bass for studio music operation.
Factory setting
: +08 dB
㊱
>
> -14 .. . +14 dB
AUDIO 21/22
High-bass Studio Line-in
Sets the low-bass for studio music operation.
Factory setting
: +14 dB
㊲
>
> -14 .. . +14 dB
AUDIO 22/22
Low-bass Studio Line-in
Activates and deactivates the aquaCool function.
Factory setting
: off
㊳
AQUA 01/06
aquaCool
> on
> off
Determines the duration of the aquaCool spraying
time.
Factory setting
: 6
㊴
>
> 2 .. . 6 (sec)
AQUA 02/06
aquaCool spray time
Defines the aquaCool and aroma cycle time (spray-
ing time + spraying interval). If „manual“ is selected,
by pressing the aquaCool- or Aroma plus button a
spray cycle can be triggered.
Factory setting
: manuel
㊵
>
> manuel
> 1 .. . 5 (min)
AQUA 03/06
Cycle time
Starts the aquaCool test (1 cycle).
㊶
AQUA 04/06
aquaCool start testcycle
> Start: press `+` for 2s
Starts the aquaCool endurance test. After having
selected and stored the “on” setting, you must
leave the service menu and start a tanning session.
Attention! aquaCool will continue to spray
permanently during a whole tanning session.
Factory setting
: off
㊷
>
> on
> off
AQUA 05/06
aquaCool endurance test
Starts the aquaCool initialization process. A
spraying cycle of 90 seconds is started to
bleed the system before commissioning, after a
repair operation or after a canister replacement.
㊸
AQUA 06/06
aquaCool initialization
> Start: press `+` for 2s
Not available in this system.
㊹
AROMA 01/07
Aroma
O p e r a t i n g I n s t r u c t i o n s | megaSun 5600
36