A s s e m b l y I n s t r u c t i o n s
|
6808 /7908
7
2. Safety notes
2.1 General safety advice
• Follow all instructions given in this manual and all
other documents enclosed with the tanning device.
In addition, observe all relevant statutory provi-
sions and regulations, also those applicable in the
country of operation.
• The tanning device may only be installed and set
up by trained and authorised personnel having
received safety-related instruction.
• Arbitrary modifi cations or conversions of the equip-
ment are not permissible.
• Observe all danger signs and safety notices
attached to the tanning device.
• Safety notices must not be removed, and safety
equipment must not be disabled or removed.
• The tanning device must only be operated when in
perfect working condition.
• Never operate the tanning device with the outer
covers or acrylic panes removed.
• The tanning device must be controlled via an exter-
nal timer that meets the requirements of EN 60335-
2-27, cl. 22.105. Should the external timer fail, an
internal timer will switch off the tanning device
automatically after 33 minutes.
• The bench must only be opened with
bench pane folded down.
• The canopy is not designed to carry
additional loads. In particular, during
installation the canopy must not be
charged with additional loads.
• Before carrying out any work, the tanning device
must be disconnected from the mains voltage.
DANGER
Live parts
Risk of fatal injury due to electric shock
when touching live parts.
• Disconnect from mains and secure
against reconnection!
CAUTION
Hot device parts
Danger of burns from hot lamps and
housing parts. If the tanning device was
operated before being opened, lamps
and housing parts may be hot.
• Wait until the tanning device has
cooled down.
