A s s e m b l y I n s t r u c t i o n s
|
6808 /7908
19
• Place the loose cable harness together with the
condensate pump
⑮
and the condensate canister
⑭
in the electronic box.
⑮
⑭
• Have two people lift the electronic box out towards
the front and transport to the installation site.
4.6.4 REMOVE AIR CONDITIONER
• Pull the air conditioner out of the connection cone,
lift it out towards the front and transport together
with the condensate tray to the installation site.
4.7 Remove the bench
PH2
3
Be careful when putting the bench down.
Make sure that the electronic ballast tray of the
bench cannot be pressed in when putting it
down.
• Have two foam rubber pads in place
before
removing the bench
to set it down on (or
see protective padding).
• Place padding under the front and on the
side opposite the ballast tray. ->
See sec-
tion 4.7.4
4.7.1 DISCONNECT CABLE CONNECTIONS
• Disconnect plug XL1 – XL5 on the rear wall.
