M a n u a l e o p e r a t i v o
|
megaSun 5800
8
Maintenance and cleaning
Regular maintenance is required for the safe operation
of the tanning unit and must be documented. Cleaning
must be performed when necessary.
DANGER!
Live parts
Risk of fatal injury due to electric shock
when touching live parts. Disconnect from
mains according to
DIN VDE 0105.
Instructions for cleaning and
care
GENERAL
Before starting to clean the unit, take off any rings,
bracelets, watches, etc. that you might be wearing
in order to avoid scratching the surfaces.
Cleaning fluid must not run into the appliance.
TUBES
To preserve the tanning power, we recommend
cleaning the tubes and UV lamps with warm
water and a chamois after approx. 200 hours of
operation.
ACRyLIC PANES, GRAB hANDLES AND DOOR
hANDLES
If possible, use the special cleaning and disinfectant
agent “megaClean” supplied by KBL for cleaning
the acrylic parts and handles, and dilute it in water
at a ratio of 1:13.
VARNIShED AND PLASTIC PARTS
Use a damp soapy cloth to clean the varnished and
plastic surfaces.
Do not clean the large plastic parts with a dry cloth.
This might scratch the surfaces!
•
•
•
•
•
•
ChROMIUM-PLATED PARTS/MIRROR PLATE OF
FLOOR
Only clean with a damp chamois and a cleaning
agent for acrylic plastic (antistatic). Apply the
cleaning agent onto the chamois and not directly
onto the mirror surface.
CLEANING AGENTS
The surfaces and the acrylic panes must not be
cleaned with concentrated disinfectants or solvents
or other liquids that contain alcohol!
•
•
Summary of Contents for megaSun 5800
