KBL MegaSun 4800, Operating Instructions Manual

Page: 39 / 60

Maintenance intervals
Component/
wearing part
Cleaning/care Replacement
Condensate
tank
If a corresponding
message is
displayed.
When
necessary
Air fi lter
Depending on lo-
cal conditions af-
ter approx. 100
operating hours
/
Tubes
- CPI After approx. 200
operating hours
Typical value
after about
1100 operat-
ing hours.
For further in-
formation see
data sheet.
Tubes
- Electronic
Power
After approx. 200
operating hours
Typical value
after about
800 operat-
ing hours.
For further in-
formation see
data sheet.
Facial
tanners
When necessary
After approx.
500-600
operating
hours
Acrylic pane
(bench)
When necessary
After approx.
1500 hours
Acrylic panes
(others)
When necessary
When
necessary
aquaCool
nozzles
When necessary
After approx.
1000 hours
Air hoses
Check after 500
- 600 hours.
When
necessary
Air-
conditioning
unit
Clean the heat
exchangers
after 500 - 600
hours and check
the condensate
pump.
When
necessary
Tools and aids
4
Hexagon socket screwdriver (SW 4 / 60
mm) Art. No.: 3410055263
PH2
Standard Phillips screwdriver (PH2)
↵
Finally acknowledge a process by
pressing the Start button (interior display).
Number of required persons
The following chapters describe the work steps re-
quired for carrying out maintenance and care actions.
At the beginning of each chapter, the required tools
and aids are depicted, unless the corresponding
process can be carried out by one individual person
without any further auxiliary equipment.
The assembly is basically carried out in
reverse order of the disassembly.
Exceptions are especially pointed out.
• If you open the bench part or one of the
acrylic panes, you must, after closing,
acknowledge a warning message ap-
pearing on the interior display.
O p e r a t i n g I n s t r u c t i o n s |
megaSun 4800
39