KBL MegaSun 4800, Operating Instructions Manual

Page: 34 / 60

The easyCare menu item is only available with CPI
Energy and intelliSun sunbeds that are connected to
an easyCare system.
EASYCARE 01/03
SETTINGS
> press ENTER
Submenu SETTINGS.
Invoked by pressing
START (ENTER).
SUBMENU
EASYCARE SETTINGS
easyCare mode only (EConly)
man. time confi g (T.Display)
easyCare tanning time
Adjust
Set value quicktest
Melanin min value
Melanin min runtime
If this function is active, the tanning session is strict-
ly carried out on the basis of the values determined
by the easyCare system. The adjustment „on-US“
is required for operation in the United States.
Factory setting
: Depending on the operator country
>
> on-US
> on
> off
EASYCARE\SETTINGS 01/07
easyCare mode only (eonly)
If this function is active, the tanning time can be
entered at the easyCare unit. The tanning power will
be adapted automatically.
Factory setting
: off
>
> on
> off
EASYCARE\SETTINGS 02/07
man. time config (TDispl.)
Allows for preselecting the tanning time. The
tanning power will be adapted automatically.
Factory setting
: 20 min
>
> 8min .. . 20min
EASYCARE\SETTINGS 03/07
easyCare tanning time
>
> 1 .. . 7
EASYCARE\SETTINGS 04/07
Adjust
These settings must only be made by
trained service personnel!
The default setting „1“ must not be
changed.
Factory setting : 244
These settings must only be made by
trained service personnel!
EASYCARE\SETTINGS 05/07
Set value quicktest
>
> 150.. .300
Factory setting : EU=0 / USA=100
These settings must only be made by
trained service personnel!
EASYCARE\SETTINGS 06/07
Melanin min value
>
> 0.. .400
O p e r a t i n g I n s t r u c t i o n s | megaSun 4800
34