M a n u a l e o p e r a t i v o
|
megaSun 4000 / 4500
29
Functions C‘M‘A‘B‘
④ ⑤
Depending on the confi guration of your system, the
menu item
PIN II/CMAB
allows you to switch on or
off certain functions.
1. Invoke the
PIN II
menu and enter the PIN.
2. Set the desired value by pressing the plus and
minus buttons of the corresponding letter.
3. Save the settings by pressing START, press STOP
to leave the menu.
C (Channel) is deactivated if only external channel
selection with exactly one channel is available as
audio system for the unit. The channel-selection
symbol is not displayed.
M (Music) is deactivated if there is no audio system
available. No symbols regarding the audio system
are displayed.
A (Air-conditioning unit) is not displayed if the tanning
system is not equipped with an air-conditioning
unit. No symbols regarding air-conditioning are
displayed.
B (Facial tanners) You can switch the facial tanners
on or off here.
Air-conditioning functions
④
The menu item
PIN II/ACS
includes three submenus
for the control of the air-conditioning system:
PRESETTING AIR-CONDITIONING UNIT (AIRCON)
Use the menu item
AIRCON
to specify if the air-
conditioning unit should start automatically at the
beginning of the tanning session (ON) or if it must be
activated manually by the studio customer (OFF).
1. Invoke the
PIN II
menu and enter the PIN.
2. Press START to invoke the menu item
ACS
.
3. Select
AIRCON
by pressing 5 (plus button) or 0
(minus button).
4. Activate the function by pressing 4 (plus button)
or deactivate it by pressing 9 (minus button).
5. Use the START button to save the settings and
press STOP to exit the menu.
Setting the operating hours of
the tubes
④
Go to the menu item
PIN II/CM
if you want to enter
the operating hours of the tubes.
1. Invoke the
PIN II
menu and enter the PIN.
2. Press START to invoke
RÖHRENSTUNDEN
EINSTELLEN (SET OPERATING HOURS OF
TUBES)
.
3. Enter the desired value by pressing 5 (plus button)
and 0 (minus button).
4. Save the settings by pressing START and exit the
menu using the STOP button.
Download information
④
The menu items
PIN II/la.Download
and
PIN
II/fi.Download
indicate time and date of the latest
(
la.Download)
or of the fi rst (
fi.Download)
software download.
1. Invoke the
PIN II
menu and enter the PIN.
2. Select
la.Download
or
fi.Download
by
pressing 5 (plus button) or 0 (minus button).
3.
Press the START button to display the
corresponding information.
Querying software info
④
Select the menu item
PIN II/VERSION
to display
the name and number of the installed software
version. This information is also displayed for approx.
2 seconds after the unit has been switched on.
1. Invoke the
PIN II
menu and enter the PIN.
2. Press 5 (plus button) or 0 (minus button) to select
VERSION
.
3. Press START to display the version information.
Settings on service level II
