WESII User Manual
Manual-WESII-Rev1205A
Copyright © KBC Networks 2012
Page 16 of 48
www.kbcnetworks.com
process until the max RSSI is reached. Then perform the process for left to right
alignment. Once the overall max RSSI is reached, perform the up/down process
once again to make sure that there is not a more optimal up/down mounting
alignment after the left/right alignment changes. KBC Networks recommends that an
RSSI of at least 20 is achieved. If the RSSIs are lower than 20, a different frequency
might obtain the higher RSSIs. Clear wide-open line of sight from Host/AP to
Client(s) is required for max RSSIs.
Note:
In some cases, depending on the physical and RF environment, a useable
throughput rate may not be possible. See section 4.4 for technical support contact
information.
2.4.9
Locating Software Tools
A tool for RF connection set up, trouble-shooting and maintenance is recommended
to download and run from a site use laptop. Search online for a locating tool that will
scan all devices within a given subnet. The scanning tool would not be designed by
or for KBC Networks or KBC Networks products but many of these tools have been
tested with KBC Networks products. KBC Networks cannot be held responsible for
any possible malicious attacks due to online software downloads. For queries
regarding the recommended software tool, please contact KBC technical support.
