29
APPENDIX A | SolarEdge Power Optimizer Install Guide
How to install the SolarEdge power optimizer P300 – P700 . A detailed
install guide can be requested from KB Racking. This install guide is
only applicable to the SolarEdge power optimizer; please contact KB
Racking to determine applicability with other microinverters. Provide KB
Racking with specific microinverter/optimizer datasheets.
NOTE:
Power optimizers are recommended to be assembled prior to
windshield component.
1.
Align SolarEdge power optimizer slot with top support press-fit stud.
NOTE:
Power optimizers can be assembled on any top support.
2.
Place windshield behind power optimizer.
3.
Fasten windshield to top support studs with ¼”-20 nuts.
TORQUE BETWEEN 110-120 IN-LB.
______________________________________________________________________________________
.
KB Racking Inc., 1050 King St. W., Toronto, ON, M6K 0C7 | 1 (888) 661-3204 | [email protected] | www.kbracking.com
SolarEdge
power optimizer
Top support stud
¼-20” nut
