14
4
Display Box
Display functions:
①
In Standby mode, the main interface displays “---”.
①
When starting up in Cooling or Heating mode, the main interface displays the set temperature. In Fan
mode, the main interface displays the indoor temperature. In Dry mode, the main interface displays the set
temperature, and when the humidity* is set, the set humidity value is displayed on the wired controller.
①
The light display on the main interface can be turned on or off through the light button on the remote
controller.
①
When the system fails or runs in a special mode, the main interface displays the error code or the operating
status codes. For details, see the section “Error Codes and definitions”.
NOTE
Humidity*: The humidity control functions is customized.
Some display functions are available only for certain indoor unit and outdoor unit models, wired controllers,
and display boxes. For more information, please consult your local dealer or technical support.
5
Disposal
Components and accessories from the units are not part of ordinary domestic waste.
Complete units, compressors, motors etc. are only to be disposed of via qualified disposal specialists.
This unit uses hydrofluorocarbon which is only be disposed of via qualified disposal specialists.
