Kaysun Aquantia KHP-MO 4 DVR2, Installation & Owner'S Manual, Page: 63 / 88

59
Go to > FOR SERVICEMAN>13.AUTO RESTART
12.3 FLOOR DRYING UP
The unit will operate floor dryind up
on 09:00 01-08-2018.
CONFIRM
The AUTO RESTART function is used to select whether
the unit reapplies the user interface settings at the time
when power returns after a power supply failure.
10.5.13 AUTO RESTART
Use
▼ ▲
to scroll the cursor to YES and press . Floor
drying will turn off.
The target outlet water temperature during floor drying up
described in the picture below:
t_DRYUP
t_HIGHPEAK
T1S
t
t_DRYD
T_DRYPEAK
13 AUTO RESTART
YES
NON
ADJUST
13.1 COOL/HEAT MODE
13.2 DHW MODE
10.5.14 POWER INPUT LIMITATION
How to set the POWER INPUT LIMITATION
Go to > FOR SERVICEMAN>
14.POWER INPUT LIMITATION
14 POWER INPUT LIMITATION
0
ADJUST
14.1 POWER LIMITATION
The AUTO RESTART function reapplies the user interface
settings at the time of the power supply failure. If this function
is disabled, when power returns after a power supply failure,
the unit won’t auto restart.
10.5.15 INPUT DEFINE
How to set the INPUT DEFINE
Go to > FOR SERVICEMAN> 15.INPUT DEFINE
15 INPUT DEFINE
REMOTE
NON
NON
NON
NON
ADJUST
15.1 M1M2
15.2 SMART GRID
15.3 Tw2
15.4 Tbt1
15.5 Tbt2
10.5.16 CASCADE SET
How to set the CASCADE SET
Go to > FOR SERVICEMAN>16.CASCADE SET.
10.5.17 HMI ADDRESS SET
How to set the HMI ADDRESS SET
Go to >FOR SERVICEMAN>16.HMI ADDRESS SET.
16 CASCADE SET
10%
5 MIN
0
16.1 PER START
16.2 TIME_ADJUST
16.3 ADDRESS RESET
17 HMI ADDRESS SET
MASTER
1
17.1 HMI SET
17.2 HMI ADDRESS FOR BMS
15 INPUT DEFINE
HMI
-2°C
NON
<10m
NON
ADJUST
15.6 Ta
15.7 Ta-adj
15.8 SOLAR INPUT
15.9 F-PIPE LENGTH
15.10 RT/Ta_PCB
15 INPUT DEFINE
NON
ADJUST
15.11 PUMP_I SILENT MODE
15.12 DFT1/DFT2
DEFROST
17.3 STOP BIT 1