KayserBetten Emma I 1.0, Instruction Manual

Page: 32 / 52

32
Instruction manual for care bed “Emma I 1.0”
Unlocking/locking control keys - safe termination
1. To unlock the control keys insert the blue key into the knob on
the backside of the hand switch and switch to the open lock sym-
bol.
» The control keys are unlocked.
2. To lock the control keys insert the blue key into the knob on the
backside of the hand switch and switch to the closed lock sym-
bol.
» The control keys are locked (see chapter “Setup and functions”).
Flatness tolerance
‹
For manufacturing and constructional reasons it is possible that
the drive mechanisms for hight adjustment do not move at the
same speed. Therefore the sleeping platform does not move in an
exact horizontal position. For insert frames in sizes 200x100cm
the difference between head and foot section may be +/-15 mm
(+/- 0.4˚).
‹ Moving the platform up and down (without reaching the final po-
sition) as well as varying loads may increase the inclined position
of the sleeping platform.
‹ By operating the height adjustment regularly into the upper or
lower final position (until the drives stop) you can counteract
this effect. This way the sleeping platform is brought back into its
original horizontal position.