EN
7
DESCRIPTION
PACKAGE CONTENTS
Item
Qty.
Tent bag
1
Pole bag
1
Peg bag
1
Tent
1
Tent poles
3
Guy ropes
4
Tent pegs
12
INSTALLATION
1. Spread out the tent with the floor side
facing down. Insert the two longer tent
poles in the sleeves and cross them over
one another. Insert the shortest tent bar
into the sleeve on the front.
FIG. 1
2. Erect the tent. Place the ends of the long
tent poles in the corresponding tubes
(tube and ring) in the corners of the tent.
Place the ends of the short tent pole in
the corresponding rings on the sleeves of
the tent. Secure the rings (tube and ring)
at the corners of the tent and the elastic
loops around the bottom of the tent to
the ground using the tent pegs.
FIG. 2
3. Tension the guy ropes evenly and secure
them to the ground using tent pegs. The
length of the ropes can be adjusted.
FIG. 3
4. The tent should now look like this.
FIG. 4
SAFETY INSTRUCTIONS
The following safety precautions must be
implemented when camping.
• Do not use candles, matches or any other
naked flames in the vicinity of the tent.
• Do not cook food in the tent.
• Light any campfires several metres
downwind of the tent, and make sure that
the fire is properly extinguished before
leaving the campsite, or before going into
the tent.
• Take great care when using lamps or
heaters filled with fuel in the tent. If
possible, use
• battery-powered lights.
• Do not fill up lamps, heaters or stoves in
the tent.
• Turn off, or extinguish, all lights before
going to sleep.
• Do not smoke in the tent.
• Do not store any flammable liquids in the
tent.
SYMBOLS
Read the instructions.
TECHNICAL DATA
Size
135 x 210 + 60 x 110 cm
Weight
2,6 kg
Water column
2000 m
