2 0 H a M e s i l a S t . , N e s h e r 3 6 8 8 5 2 0 , I s r a e l
P O B 2 5 0 0 4 , H a i f a 3 1 2 5 0 0 1 , I s r a e l
T e l : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 0 0 F a x : ( + 9 7 2 ) - 7 2 - 2 7 2 3 5 1 1
Page no. 41 | Configuration Interface
7.10
Test Control
Test Control category contain parameters for camera testing and analysis purposes only. These configurations are
not required for standard operation of the camera.
Configuration of these parameters might result in unexpected camera behavior if wrong value is input.
Figure 34 – Test Control parameter configuration in GenICam Browser
7.10.1
Test Control XML Parameters
Parameter
Description
Gen<i>Cam name
Type
Possible values
Remarks
Value
Gen<i>Cam name
Gen<i>Cam Category: TestControl
Delay Between
Exposures
Delay between exposures
in microseconds(usec)
DelayBetweenExposures Float
Delay Between Lines
Delay between lines in
microseconds(usec)
DelayBetweenLines
Float
Line Duration
Line processing time in
units of 11.43 nano-
seconds(nsecs)
LineDuration
Integer
Black Level Auto Status
Status value of Black Level
Auto correction
BlackLevelAutoStatus
Integer
