Laws and building and safety codes governing the design and use of glazed entrance, window
, and curtain wall products vary widely
. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor
.
Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
© Kawneer Company
, Inc., 2013
11
kawneer.com
EC 97904-076
11/16"
11/16"
40"
7/8"
1-1/2"
1"
5/8"
1-5/32"
21/32"
1-5/16"
1/4"
FRAME OPENING MINUS 1-9/16"
TO BOTTOM OF DOOR
MULLION
STABILIZER
SHOE
MULLION
SHOE MULLION
MOUNTING PLATE
(SEE SECTION "A-A")
"A"
"A"
"B"
"B"
C/L OF DOOR OPENING
LINE OF DOOR STOP
PREP FOR
1/4-20 X 1-1/8" FHMS
3/8"
W/ 1/4-20 FLOOR ANCHOR
7/16"
1-1/8"
ATTACH SHOE MULLION
TO MOUNTING PLATE (SHOWN DASHED)
ATTACH SHOE MULLION MOUNTING
PLATE TO T-BAR
EXTERIOR
WITH THRESHOLD
WITHOUT THRESHOLD
SECTION "B-B"
(BOTTOM SHOE MULLION)
SECTION "A-A"
(TOP SHOE MULLION)
(WITH OR WITHOUT THRESHOLD)
SHOE
MULLION
BACK PLATE FOR SHOE MULLION
AT HEADER/T-BAR
BACK PLATE FOR SHOE MULLION
AT THRESHOLD
Kawneer 1786 Rim Exit Device
INSTALLATION INSTRUCTIONS
APRIL, 2018
038311EN
REMOVABLE MULLION INSTALLATION
1)
Attach shoe mullion mounting plate to header/t-bar as shown.
2)
Attach top shoe mullion to mounting plate on header/t-bar as shown.
3)
Secure bottom shoe mullion to floor as shown.
4)
Check removable mullion for correct length from bottom of mullion to
centerline of strike.
a)
Cut mullion to proper overall length if required.
5)
Slip removable mullion into top shoe mullion, pick up and swing
onto bottom shoe mullion.
6)
Install back plate onto shoe mullion at header/t-bar and threshold.
(See Figure #1)
FIGURE #1
