Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement.
© Kawneer Company
, Inc., 2013
Laws and building and safety codes governing the design and use of glazed entrance, window
, and curtain wall products vary widely
. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor
.
4
kawneer.com
EC 97904-076
Kawneer 1786 Rim Exit Device
INSTALLATION INSTRUCTIONS
APRIL, 2018
038311EN
TO DOG EXIT DEVICE
Insert the hex key and turn clockwise until it stops.
Fully depress touch bar and release the key.
With touch bar retracted remove hex key.
TO UNDOG EXIT DEVICE
Push on touch bar. Insert hex key and turn clockwise
until it stops. Release touch bar, when the touch
bar is in the extended position release hex key and remove.
EXIT DEVICE WITH PUSH PAD DOGGING
RIM EXIT DEVICE ATTACHMENT (Push Pad Dogging or Cylinder Dogging)
1)
Undog exit device.
2)
Install exit device onto door stiles as indicated below.
3)
Attach exit device to pivot stile with mounting bracket and fastener provided.
DOGGING KEY
LOCK STILE
#12-24 ATTACHMENT FASTENERS
4)
Attach exit device to lock stile with fasteners provided.
END CAP
MOUNTING BRACKET
PIVOT STILE
ATTACHMENT FASTENER
