![background image](http://html1.mh-extra.com/html/kawai/novus-nv10s/novus-nv10s_owners-manual_3996470083.webp)
83
A
pp
endix
Jack Panel and Headphone Panel (NV10S) /
Jack/Control Box (NV5S)
LINE IN STEREO jack (1/8” phone jack)
This jack is used to connect the 1/8” stereo outputs from smart
phones, tablets, computers, or other electronic audio equipment to
the NV10S/NV5S hybrid piano’s amplifier and speakers. The input
level can be adjusted using the LEVEL knob (NV10S only), or by
adjusting the volume of the connected device.
When using the USB audio recorder function, this LINE in audio
will also be mixed with the instrument’s internal sound and
recorded to the MP3/WAV file.
* The “Line In Volume” setting can also be used to adjust the level of the
LINE IN signal.
Ref.
“Line In Volume” P. 68
LINE OUT jacks
(NV10S : 1/4” phone jacks NV5S : 1/8” phone jack)
These jacks are used to connect the stereo output of the NV10S/
NV5S hybrid piano’s sound to external speakers, amplifiers,
mixers, recording devices, and similar equipment.
To output a mono signal, connect a single cable to the L/MONO
jack. (NV10S only)
The LINE OUT level can be adjusted using the MASTER VOLUME
knob.
USB to Host port (“B” type)
This USB port is used to connect the NV10S/NV5S hybrid piano to
a computer using an inexpensive USB cable. When connected,
the instrument can be used as a standard MIDI device, allowing it
to send a receive MIDI data. Connect a “B” type USB connector to
the instrument, and an “A” type USB connector to the computer.
Ref.
“USB MIDI information” P. 84
With additional conversion adaptors, this port may also be used
to connect the NV10S/NV5S hybrid piano to tablets and other
mobile devices.
MIDI IN/OUT jacks
These jacks are used to connect the NV10S/NV5S hybrid piano
to external MIDI devices, or to a computer (using a USB-MIDI
interface) as an alternative to the “USB to Host” port.
Ref.
“MIDI” P. 72
PHONES jacks (1/4” & 1/8” phone jacks)
These jacks are used to connect stereo headphones to the
NV10S/NV5S hybrid piano. Two pairs of headphones can be
connected and used simultaneously. When a pair of headphones
is connected, sound will not be produced by the speakers.
USB to Device port (“A” type)
This USB port is used to connect a USB memory device to the
NV10S/NV5S hybrid piano. This allows MP3/WAV audio files, and
SMF song files to be played directly. It is also possible to record
performances to MP3/WAV audio files, and save recorder songs
stored in internal memory for posterity.
* Only connect USB memory devices to the USB to Device port.
* Connect the USB memory device directly, without using a USB
extension cable.
USB device information
The “USB to Device” functionality of the NV10S/NV5S hybrid
piano conforms to USB2.0 Hi-Speed standards. Older USB
devices can still be used, however data transfer speed will be
limited to the maximum transfer speed of the device.
Only connect USB memory devices to the USB to Device port.
Connect the USB memory device directly, without using a USB
extension cable.
It may be necessary to format the USB memory device before
it can be used with the NV10S/NV5S hybrid piano.
Formatting the device will erase all data.
Avoid removing the USB memory device while data is being
loaded or saved, files are being renamed or deleted, or the
device is being formatted.
Other USB devices, such as computer mice, keyboards, or
battery chargers etc. cannot be used with this instrument.
Make sure to turn off the power of the instrument before connecting with other equipment.
Summary of Contents for Novus NV10S
