1
In
tr
od
uc
ti
on
2
Front Panel: Jacks & Connectors
HEADPHONE jack
The headphone jack is located at the left end of the key block
and used to connect a pair of headphones equipped with a
standard 1/4” phone jack.
USB TO DEVICE port
The USB to Device port is located at the right end of the key
slip and used to connect a FAT or FAT32 formatted USB memory
device to load and save data.
Rear Panel: Jacks & Connectors
POWER Section
AC IN
Connect the power cable included with the MP11 to this
receptacle.
POWER SWITCH
This switch turns the MP11 ON and OFF.
* The MP11 features a power saving mode that can turn off the instrument
automatically after a specified period of inactivity. For more information,
please refer to page 99.
MIDI Section
MIDI THRU/OUT/IN jacks
These jacks are used to connect the MP11 to external MIDI
devices, and also to a computer with a MIDI interface as an
alternative to the ‘USB to Host’ port.
USB TO HOST port
This port is used to connect the MP11 to a computer using a
USB cable. When connected, the instrument can be used as a
standard MIDI device, allowing it to send a receive MIDI data.
Connect a ‘B’ type USB connector to the instrument, and an ‘A’
type USB connector to the computer.
* When connecting the MP11 to a computer using the ‘USB to Host’ port,
additional driver software may be required. For more information, please
refer to page 108.
Part Names & Functions
.
* The instrument’s USB MIDI port and MIDI IN/OUT jacks can be connected
and used simultaneously. To adjust MIDI routing, please refer to the MIDI
parameters in the SYSTEM menu, explained on page 102.
Summary of Contents for MP11
Page 2: ......
Page 134: ...134 Appendix Hello to Jason Isaacs Joep snijd je baard User Notes ...
Page 135: ......